Details
Rhino Concrete Solutions Patching Mix is a special "Just Add Water" blend of cement, sand, Powder Polymer and other ingredients used as a patching material for a variety of applications.
It is used to repair holes and spalls; as a leveling coat to fill in low areas or to make a rough surface smooth; as a repitching coat to correct the slope for proper drainage; as an underlayment for carpet, tile or other types of flooring; to patch stucco and masonry, to eliminate tripping hazards at joints where one side of a concrete slab is raised, as well as other repair and resurfacing applications.
The Rhino Concrete Solutions Patching Mix can be applied from less than 1/16 of an inch to 1/2 of an inch thick and feathered to zero. It is also used to make repairs, when needed, prior to applying an Polymer Concrete resurfacing, texturing or 1/4" stamping application. It can even be used as a 1/4" -1/2" stamping material for samples or small jobs.
Additional Information
| SKU | PM |
|---|---|
| MSDS & Data Sheets |
You will need Adobe Acrobat Reader to view and print PDF files.
|
| Features & Benefits | 1/16" thick - 100 sq.ft. per 50 lb. pail of Patching Mix. 1/8" thick - 50 sq.ft. per 50 lb. pail of Patching Mix. 1/4" thick - 25 sq.ft. per 50 lb. pail of Patching Mix. 3/8" thick - 18 sq.ft. per 50 lb. pail of Patching Mix. 1/2" thick - 13 sq.ft. per 50 lb. pail of Patching Mix.
Three quarts of water per 50 lbs. of patching mix will make a dryer mix for deep holes or vertical patching. Four quarts of water per 50 lbs. of patching mix will make a good consistency for 1/4 - 1/2" patching (or stamping). Four and a half quarts of water per 50 lbs. of patching mix will make a wetter mix for 1/16 - 1/8" resurfacing applications. |
| Coverage Rate | See Features & Benefits. |
